Action 6: Plug In And Turn On Your Printer - Brother HL-1020 Service Manual

Action 6: Plug in and Turn on Your Printer

1
2
3
4
Starter Sheet
Plug the power cord into the AC power
outlet and the printer power inlet.
NOTE
The shape of the power cord varies
according to the country of destination.
Turn on the power switch that is located
on the left side of your printer.
Make sure that the READY lamp is lit after
the printer has warmed up (approximately
30 seconds).
Make sure that the printer automatically
ejects the starter sheet while the printer is
warming-up immediately after installing a
new drum unit.
-11 -