Action 3: Install The Toner Cartridge/Drum Unit - Brother HL-1020 Service Manual

Action 3: Install the Toner Cartridge/Drum Unit

1
2
3
4
Unpack the drum unit assembly with the
toner cartridge included. Gently shake it
from side to side five or six times.
!
CAUTION
Do not expose the drum unit to light for
longer than a few minutes, as this will
damage the drum.
Starter Sheet
!
CAUTION
Do not remove the starter sheet.
This sheet will be ejected while the printer
is warming-up after installing a new drum
unit. (See Action 5 Illustration 4)
Open the top cover of the printer by holding
both sides of it.
Holding the drum by its handles, install it
into the printer.
Close the top cover.
See "CHAPTER 5 MAINTENANCE" in
the On-line User's Guide for more
information about replacement of the toner
cartridge.
- 4 -