Alarm Indications At A Glance - Brother HL-1020 Service Manual

ALARM INDICATIONS AT A GLANCE

Operator Calls
If a recoverable error occurs, the printer indicates an 'operator call' by blinking the Alarm
lamp and any of the following lamps.
Find the error and take the proper action to correct it. The printer automatically recovers from
most errors, but you may need to reset the printer with the panel switch as described below.
Blinking Lamp Error
Paper
Alarm
Toner
Alarm
(every 5 seconds)
Toner
Alarm
(Fast blinking)
Action
Paper jam Clear the paper jam referring to the next section "PAPER
JAMS" and press the panel switch if the printer does not
automatically resume printing.
Paper empty Load paper in the printer
guide Chapter 2
Reinstall the paper and press the panel switch.
Misfeed
Toner low Indicates that the printer has approximately 100 pages of
printing left before the toner cartridge is empty. Prepare a
new toner cartridge.
Toner Empty Replace the toner cartridge with a new one
On-line user's guide Chapter 5.
referring to the On-Line user's
and press the panel switch.
- 30 -
referring to the