Changing The Machine Settings - Brother Innov-is 500D Operation Manual

SE-BrotherE_sgml.book Page 15 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Changing the Machine Settings

Various sewing machine operations and sewing settings can be changed.
The stitch or machine attributes that can be set are listed below.
Attribute
Thread color/
needle count
Needle
position
Twin needle
sewing
Thread color
index
Automatic
thread cutting
for embroidery
Stitch width
control
Vertical pattern
adjustment
Buzzer
Opening
screen
Language
LCD brightness
Turn on the sewing machine.
The LCD comes on.
Icon Details
You can switch among thread color/thread
number/needle count when embroidering.
Specifies where the needle is positioned
when the sewing machine is stopped.
Specifies the twin needle.
When embroidery data containing custom
thread colors specified with the PE-DESIGN
Ver.5.0 is saved on a blank card, the stored
custom thread colors are displayed on the
machine, if "ON" is selected for this setting.
Press this key to use the automatic thread
cutting function when embroidering.
Allows the stitch width to be adjusted with
the sewing speed controller.
Adjusts the up and down position of the
pattern (page 117).
Specifies whether or not a beep is sounded
with each operation (page 173).
Sets whether or not to display the opening
screen when the power is turned on.
(There are models where this cannot be
changed.)
Allows the language used in the screens to
be changed.
Adjusts the brightness of the LCD.
Settings
Thread color/Embroidery thread
number/Country Embroidery thread
number/Needle count/Time to
Embroider (after
Down
Normal needle
-9 to +9
English, French, German, Dutch,
Spanish, Italian, Danish,
Norwegian, Finnish, Swedish,
Portuguese, Russian, Japanese,
Korean or others
Lighter
Press (Settings key) on the display panel.
LCD (liquid crystal display) operation 15
is pressed)
Up
Twin needle
Darker