Turning On The Machine; Turning Off The Machine - Brother Innov-is 500D Operation Manual

SE-BrotherE_sgml.book Page 13 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Turning on the machine

Prepare the included power cord.
Make sure that the sewing machine is turned
off (the main power switch is set to "
then plug the power supply cord into the
power supply jack on the right side of the
machine.
Insert the plug of the power supply cord into a
household electrical outlet.
Power supply jack
Press the right side of the main power switch
on the right side of the machine (set it to "|").
The sewing lamp comes on when the
machine is turned on.
Fold the flap at the front of the sewing
machine down toward you.

Turning off the machine

When you are finished using the sewing machine,
turn it off. In addition, before transporting the sewing
machine to another location, be sure to turn it off.
"), and
Make sure that the machine is not sewing.
Press the left side of the main power switch on
the right side of the machine (set it to "
The sewing lamp goes off when the machine
is turned off.
Unplug the power supply cord from the
electrical outlet.
Grasp the plug when unplugging the power
supply cord.
Unplug the power supply cord from the power
supply jack.
Note
If a power outage occurs while the sewing
machine is being operated, turn off the
sewing machine and unplug the power
supply cord. When restarting the sewing
machine, follow the necessary procedure to
correctly operate the machine.
(For U.S.A. only)
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electrical shock, this plug is intended
to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not modify the plug in any way.
Turning the Machine On/Off 13
").