Table of Contents
Advertisement
5
Chapter
Appendix
5
CLEANING PRECAUTIONS
Cleaning the surface of this machine
Using a soft, dry cloth, wipe off any dust and dirt from the surface of the machine. Dirt that is hard to
remove can be cleaned off using a damp cloth.
Before cleaning, disconnect the AC adapter from the electrical outlet, otherwise injuries or
electric shock may occur.
CAUTION
•
Do not use solvents such a benzene, thinner or alcohol to clean the surface of the
machine, otherwise it may become discolored or damaged the surface.
TROUBLESHOOTING
If this machine is not working correctly, check the following table for details on how to fix it. If the machine
is still not working correctly, contact your Brother retailer or visit www.brother.com for the name of your
nearest authorized service center.
Symptom
The machine cannot
be turned on.
The embroidery
cannot be sewn. The
pattern is not sewn
correctly.
Cause
The AC adapter is not connected
correctly.
1 The pre-cut design fabric is not
correctly placed in the design
frame.
2 The design frame is not correctly
inserted into the machine.
3 The specially designed pre-cut
design fabric was not used.
4 The thread cartridge has run out
of thread.
5 The thread is not feeding out of
the cartridge.
WARNING
Make sure that the AC adapter is connected
correctly. (page 9)
Make sure that the pre-cut design fabric is
correctly placed in the design frame. (page
10)
Make sure that the design frame is correctly
inserted into the machine. (page 16)
Use only the pre-cut design fabrics
designed exclusively for this machine.
(page 10)
Insert a new thread cartridge. (page 14)
Make sure that the thread feeds correctly
from the thread cartridge. (page 45)
Solution
49
Hide quick links:
Advertisement
Table of Contents
