Step 5 Embroidering The Appliqué - Brother E-100 Operation Manual

G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
Removing the design frame
1 1
1 1 Pull the design frame straight out.
CAUTION
• Before pulling out the design frame, remove the thread cartridge, and make sure that the
design frame has moved to its starting point so it can be taken out.
NOTE
• When embroidering is finished or while sewing chenille embroidery, the design frame
automatically moves so that it can be taken out after the thread cartridge is removed. (See
the section Chenille embroidery on page 25.) If you want to stop embroidering and take
out the design frame, follow the instructions in the section Removing the design frame on
page 44.
G G
5. Embroidering the appliqué
Before embroidering, check that the thread cartridge and design frame are correctly inserted.
1
Press the
The part of the pattern shown on the LCD display
is embroidered.
Key information
• To stop embroidering, press the
stop.
• To continue embroidering, press the
MAKING AN EMBROIDERED APPLIQUÉ FROM A ONE-POINT PATTERN
key.
key. After sewing a few stitches, the machine will
key.
17