STOPPING AND CONTINUING EMBROIDERING / REMOVING THE DESIGN FRAME
REMOVING THE DESIGN FRAME
G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
6
Press the
The screen displayed at the right appears again.
Key information
•
Pressing the
•
To go back to step 4, press the
7
Insert the thread cartridge, and then press the
REMOVING THE DESIGN FRAME
If you want to stop embroidering and take out the design frame, follow the steps below.
1
Press the
After sewing a few stitches, the machine stops.
Press the thread cartridge release button
2
(
), and then remove the thread
cartridge.
3
Press the
moves to its starting point, pull it straight
out.
NOTE
•
If the screen shown at the right appears, the
thread cartridge was not removed. Remove
the thread cartridge.
44
key.
key displays the screen shown at the right.
key to stop embroidering.
key. After the design frame
key.
key to continue sewing.