Table of Contents
Advertisement
1
1
Removing the protective
parts
1
Remove the protective tape.
2
Remove the foam bag containing the ink
cartridges from on top of the paper tray.
2
Opening the document
support and document tray
1
Open the document support (
document tray (
extension (
).
3
Loading paper
You can load up to 100 sheets of 20 lb
2
(80 g/m
) paper.
For details, see Acceptable paper and other
media in Chapter 2 of the User's Guide.
1
Pull the paper tray completely out of the
machine. If the paper support flap (1) is open,
close it. Open the output paper tray cover (2).
2
) and the
) and then pull out the
1
2
3
1
Setting Up the Machine
2
If you are using Letter, A4 or Legal size paper,
press and hold universal guide release
button (1) as you slide out the front of the paper
tray to match the paper size you are using.
1
3
Press and slide the paper side guides (1) and
paper length guide (2) to fit the paper size.
1
2
4
Fan the stack of paper well to avoid paper jams
and misfeeds.
5
Gently put the paper into the paper tray print
side down and top edge first.
Check that the paper is flat in the tray.
3
Advertisement
Table of Contents
