Tracer System Options - ADTRAN TRACER 4106 Plan A System Manual

TRACER 4106/4206 System Manual
>TRACER S
YSTEM
Figure 4 shows the TRACER 4106/4206 System Options menu page. System option parameters for both
the local and remote TRACER 4106/4206 units are available through this menu page.
Press <O> from any menu in the TRACER 4106/4206 VT100 menu structure to access the
TRACER System Options menu page.
>TRACER S
YSTEM
Displays the approximate receiver levels (for both the local and remote units) using a series of symbols (
The more symbols ( # ) displayed, the stronger the signal. If the link is down in either direction, and remote
end data is unavailable,
display only.
>TRACER S
YSTEM
Allows the transmitter levels (for both the local and remote units) to be adjusted. The current transmitter
level is displayed using a series of symbols (
the link is down in either direction, and remote end data is unavailable,
place of the symbols ( #
Reducing the transmitter power of the remote TRACER 4106/4206 could cause the RF link
to drop, requiring a technician to manually increase transmit power through the menu
system at the remote site.
>TRACER S
YSTEM
Provides a user-defined alphanumeric description (up to 25 characters) for the TRACER 4106/4206
system.
612804206L2-1A
O
PTIONS
Figure 4. TRACER 4106/4206 System Options
O > RX P
PTIONS OWER
D N A displays in place of the symbols (
ATA OT VAILABLE
O > TX P
PTIONS OWER
# ). The more symbols (
).
O > S N
PTIONS ITE AME
© 2004 ADTRAN, Inc.
Section 5 User Interface Guide
# ). This parameter is
# ) displayed, the stronger the signal. If
D N A
ATA OT VAILABLE
# ).
displays in
47