Advertisement
USER'S GUIDE
INPUT
BUFFER
SIZE
100K
51K
30K
4–42
7M
SAVE SETTINGS
Suppose you share this printer with others who want different panel
switch settings or you use the printer with different settings.
Since you can save the current settings in the printer's memory, you
can easily reset the printer to your necessary settings after they are
changed. For resetting the printer, see "RESET Switch" in Chapter 4.
Use the panel switches to set the configuration of the printer to your
needs and then enter this mode menu to save your settings. Two sets
of user settings can be saved in the printer as follows:
Display Message
SAVE SETTING 1
SAVE SETTING 2
If you want to check the user settings, you can print out a list of the
settings with the TEST switch. See "TEST Switch" in Chapter 4.
Note
No user settings have been factory set.
15 SQUARES
5 SQUARES
1 SQUARE
14M
Fig. 4-5 Input buffer size
User Setting
Save the current settings as No. 1 in the
printer's memory.
Save the current settings as No. 2 in the
printer's memory.
14M
4M
30K
26M
RAM SIZE
Advertisement
