Advertisement
• Save Macro
Note
The "SAVE MACRO" menu appears only in the HP LaserJet 4
emulation mode.
If you have downloaded a macro in the printer's memory, you can save
the macro on the installed flash memory card or HDD card.
If a macro has been downloaded in the printer's memory and you
press the SET switch at "SAVE MACRO," the printer prompts you to
select the ID of the macro.
MACRO ID=#####
Select the ID with the
so that the printer saves the macro with the selected ID.
Note
When you see an asterisk on the display, the ID number has been
used for another macro or data. If you select the used ID number, the
old macro or data is erased and replaced with the new macro.
You can execute a macro with the macro execution command.
• Primary Font or Secondary Font
Note
The "PRIMARY FONT" and "SECONDARY FONT" menus appear
only in the HP LaserJet 4 emulation mode.
If you have selected the primary or secondary font with the FONT
switch, you can save the font on the installed flash memory card or
HDD card.
When you press the SET switch at "PRIMARY FONT" or
"SECONDARY FONT," the printer prompts you to select the ID of the
font.
FONT ID=#####
or
switch and press the SET switch again,
CHAPTER 4 CONTROL PANEL
4–33
Advertisement
