Advertisement
USER'S GUIDE
Mode Menu (Continued) Setting Menu
CARD OPERATION
(HP mode only)
(See 4-28.)
ADVANCED MODE
(See 4-37.)
PAGE COUNTER
(See 4-43.)
exit MODE
(See 4-43.)
4–10
Sub-Setting Menu
When the commercial flash memory card or the HDD card has been formatted:
EXECUTE DATA
DATA ID=#####
exit
CARD LIST
SAVE
SAVE DATA
SAVE MACRO
PRIMARY FONT
SECONDARY FONT
DOWNLOAD FONT
exit
DELETE
MACRO ID=#####
DATA ID=####
FONT ID=#####
FORMAT CARD
exit
NETWORK MODE
LOCK PANEL=OFF
PASS NO=###
AUTO FF=OFF
FF SUPPRESS=OFF
TONER LOW=CONT
exit
CONTINUE MODE
CONTINUE=MANUAL
PRINT DENSITY
INPUT BUFFER
SAVE SETTINGS
SAVE SETTING 1
SAVE SETTING 2
exit
COUNT= 0
Setting
Execute the data on the
card.
Execute the selected data.
Exit to EXECUTE DATA
Print the contents of the card.
Send data to be saved.
SET KEY--> END
End saving the data.
DATA ID=#####
Set data ID for saved data.
Save a macro.
MACRO ID=#####
Set macro ID for saved
macro.
Save primary font.
FONT ID=#####
Set primary font ID for saved
font.
Save secondary font.
FONT ID=#####
Set secondary font ID for
saved font.
Save download font.
FONT ID=#####
Set download font ID for
saved font.
Exit to CARD OPERATION
Delete the selected macro.
Delete the selected data.
Delete the selected font.
Format the flash card.
SET –> DELETE ALL
Execute formatting the card.
exit
Exit to FORMAT CARD
Exit to CARD OPERATION
ON or OFF
Enter pass number.
ON or OFF
WAIT TIME= 5s
1 to 99 seconds for AUTO ON
ON or OFF
CONT or STOP
exit to NETWORK MODE
AUTO or MANUAL
Increase or decrease the
print density. (15 levels)
Increase or decrease the
input
buffer capacity. (15 levels)
Save the current setting as #1
Save the current settings as
#2
exit to ADVANCED MODE
Shows the number of printed
pages.
Exit MODE.
Advertisement
