Suzuki SWIFT Owner's Manual page 83

delay turning on the blower until warmed
or chilled air is available.
• If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly.
• Even under the automatic operation, you
can set some of the blower speed selec-
tor (2) and MODE (air flow) selector (5)
into manual mode. Then the manually
selected function is maintained preferen-
tially, and the other functions remain
under automatic operation. In this case,
the "FULL AUTO" indicator in the display
will go out.
• Even under the automatic operation, you
can select "FRESH AIR" or "RECIRCU-
LATED AIR" manually. Then
selected air is maintained preferentially,
and the other functions remain under
automatic operation. In this case, the
"FULL" indicator in the display will go
out.
• Even if the engine is turned off, the tem-
perature setting remains in the memory.
• When turning the defroster switch (6) on
under the automatic operation, the
blower speed will be increased, "FRESH
AIR" mode will be selected and the air
conditioning system will turn on. In this
case, the "FULL AUTO" indicator will go
out. When turning the defroster switch
off, it will be returned to the previous set-
ting.
• With the air conditioning switch turned
off, it is not possible to lower the inside
temperature below the outside tempera-
ture.
• If the "AUTO" indicator in the display
blinks with the ignition switch in the "ON"
position, there is a problem with the air
conditioning system. Bring the vehicle to
your SUZUKI dealer to have the problem
corrected.
Manual Operation
You can manually control the climate con-
trol system. Set the selectors to your
desired position.
the
INSTRUMENT PANEL
(d)
(c)
EXAMPLE
Be careful not to cover the interior temper-
ature sensor (c) between the steering
wheel and the climate control panel, or the
solar sensor (d) located at the top of the
driver's side dashboard. These sensors
are used by the automatic system to regu-
late temperature.
63JP0-01E
77J043
3-22