Jam A1 / Jam A2 (Paper Jam In The Paper Tray) - Brother HL-2700CN series User Manual

Do not touch the toner surface of the jammed paper. It might stain your hands or clothes.
After removing the jammed paper, and the next printed page is stained with toner, print several
test pages before restarting your print job.
Remove the jammed paper carefully to prevent spreading toner.
Take care not to stain your hands and clothes. Wash toner stains immediately with cold water.
Never touch the transfer roller.
If the paper in the paper tray is creased at the edges, paper jams can occur. To prevent this,
please turn the paper over.
Do not use the following paper:
Bent/curled paper
Moist paper
Paper that does not meet specifications

JAM A1 / JAM A2 (paper jam in the paper tray)

If there is a paper jam in the paper tray, follow these steps:
1
Pull out the paper tray.
2
Take out the jammed paper.
3
Put the paper tray back in the printer.
4
Open the back cover. If there is any jammed paper where the paper comes out, remove it.
5
Close the back cover.
6 - 9 TROUBLESHOOTING
JAM A1
JAM A2
Figure 6-2