Replacing The Waste Toner Pack - Brother HL-2700CN series User Manual

Replacing the waste toner pack

Do not put the waste toner pack into a fire. It could explode.
Be careful not to spill the toner. Do not inhale or allow it to get into your eyes.
Handle the waste toner pack carefully. If toner scatters on your hands or clothes, immediately wipe
or wash it off with cold water.
1
Open the front cover of the printer.
2
Remove the waste toner pack from the holder at the lower right hand side of the printer. Be careful
not to spill the toner.
3
Take the cap off the new wast toner pack, and put the cap on the used waste toner pack.
When you discard the used waste toner pack, place it in the plastic bag included with the
replacement waste toner pack.
Discard the used waste toner pack according to local regulations, keeping it separate from
domestic waste. If you have questions, call your local waste disposal office.
4
Put the new waste toner pack into the waste toner pack holder.
5
Close the front cover.
Figure 5-5
Figure 5-6
Figure 5-7
ROUTINE MAINTENANCE 5 - 9