Brother HL-2700CN series User Manual page 10

International E
The purpose of the International E
popularization of energy-efficient office equipment.
TAR ®
As an E S Partner, Brother Industries, Ltd. has determined that this product meets the E
NERGY
TAR ®
S guidelines for energy efficiency.
Laser Safety (100 to 120 volt model only)
This printer is certified as a Class I laser product under the U.S. Department of Health and Human
Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and
Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within protective housings and external
covers, the laser beam cannot escape from the machine during any phase of user operation.
FDA Regulations (100 to 120 volt model only)
U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured
on and after August 2, 1976. Compliance is mandatory for products marketed in the United States. One
of the following labels on the back of the printer indicates compliance with the FDA regulations and must
be attached to laser products marketed in the United States.
MANUFACTURED:
Brother Industries, Ltd.,
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21 CFR subchapter J.
Caution: Use of controls, adjustments or performance of procedures other than those specified this User's
Guide may result in hazardous radiation exposure.
®
S Compliance Statement
NERGY TAR
TAR ®
S
NERGY
Program is to promote the development and
NERGY
ix