Brother HL-2700CN series User Manual page 117

7
Put the new OPC belt cartridge into the printer guides with the flat side facing you.
8
To lock the cartridge into the printer, push the belt cartridge lock levers that are on both sides of the
OPC belt cartridge outwards.
9
Close the top cover.
10
Turn the printer power switch back on.
11
Menu
Press any of the
12
+ –
Press or until RESET MENU appears.
13
Set
Press to proceed to the next menu level, and then press
14
Set
Press , and then press
15
Set
Press . The printer is now in the READY state.
5 - 12 ROUTINE MAINTENANCE
Figure 5-13
+ – Set Back
buttons ( , , or
+
until OPC BELT appears.
) to take the printer off line.
+ –
or until PARTS LIFE appears.