Replacing The Fusing Unit - Brother HL-2700CN series User Manual

Replacing the fusing unit

1
Turn off the printer power switch. To avoid injury, wait until the printer has cooled down sufficiently
before you replace the fusing unit.
2
Open the back cover of the printer.
3
To release the fusing unit from the printer, release the lock levers that are on both sides of the fusing
unit as shown in Figure 5-15.
4
Hold the handles on both sides as you take the fusing unit out of the printer.
5 - 14 ROUTINE MAINTENANCE
Figure 5-14
Figure 5-15
Figure 5-16