Download Print this page
FEIYUTECH AK4500 Faq
Hide thumbs Also See for AK4500:

Advertisement

Quick Links

FAQ • AK4500
TABLE OF CONTENTS
SPECIFICATIONS
1) What are the different ways the AK4500 can control cameras?
2) Could the gimbal support charging batteries via USB port?
SET-UP & OPERATION
1) How do I use the USB shutter release cable with gimbal?
2) How do I connect to the Wi-Fi with Nikon cameras?
3) I took pictures with my Sony camera while being connected with the shutter
release cable and I cannot locate the images in the Sony camera. Why is that?
4) The AK series shows "LK" after being turned on and the gimbal
cannot remain stable. How do I fix it?
TROUBLESHOOTING
1) The Canon/Nikon shutter release cable works properly but the Sony shutter
release cable doesn't. Why is that?
2) The AKF II does not work properly. What should I do?
3) Follow focus is skidding and does not work properly. How do I resolve this?
4) The gimbal vibrates at certain angles. How do I fix it?
5) I am taking pictures with the shutter release cable connected and the gimbal
is not responding to other commands. Why is that?
6) After upgrading the keyboard firmware, the gimbal does not turn on. How do
I fix this?

Advertisement

loading

Summary of Contents for FEIYUTECH AK4500

  • Page 1 FAQ • AK4500 TABLE OF CONTENTS SPECIFICATIONS 1) What are the different ways the AK4500 can control cameras? 2) Could the gimbal support charging batteries via USB port? SET-UP & OPERATION 1) How do I use the USB shutter release cable with gimbal?
  • Page 2 • Shutter release cable for Canon camera *1 • Shutter release cable for Sony cameras *1 b) Wi-Fi control: The AK4500 could be connected via Wi-Fi to some types of Canon, Panasonic and Sony cameras. For further details, please refer to the list that was uploaded to our official website.
  • Page 3 FAQ • AK4500 TROUBLESHOOTING 1) The Canon/Nikon shutter release cable works properly but the Sony shutter release cable doesn’t. Why is that? Make sure that the settings of the Sony camera have been set up as per below: “USB power supply” is “off” / “USB connect” set up with “PC remote”...