Receive Mode Settings; Ring Delay; F/T Ring Time - Brother MFC-8460N User Manual

Receive Mode settings

Ring Delay

The ring delay sets the number of times the
machine rings before it answers in Fax Only
and Fax/Tel modes.
If you have external or extension phones on
the same line as the machine or subscribe to
1
the Distinctive Ring service, keep the Ring
Delay setting of 6. (See Operation from
extension telephones on page 56 and Fax
Detect on page 42.)
1
FaxAbility in New Zealand
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 1.
21.Setup Receive
1.Ring Delay
a
03
b 04
Select ab & OK
c
Press a or b to select how many times
the line rings before the machine
answers (02-10 for Australia, 01-10 for
New Zealand, 00-10 for some
countries). Press OK.
d
Press Stop/Exit.

F/T Ring Time

6
When somebody calls your machine, you and
your caller will hear the normal telephone ring
6
sound. The number of rings is set by the ring
delay setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T ring (a fast
double-ring) for the time you have set in the
F/T ring time setting. If you hear the F/T ring
it means that you have a voice caller on the
line.
Because the F/T ring is made by the machine,
extension and external telephones will not
ring; however, you can still answer the call on
.
any telephone. For more information see
Using remote codes on page 57.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 2.
21.Setup Receive
2.F/T Ring Time
a 20 Secs
b 30 Secs
Select
c
Press a or b to select how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds for Australia and some
countries, 20, 30, 40, or 55 seconds for
New Zealand). Press OK.
d
Press Stop/Exit.
Receiving a fax
ab
& OK
6
6
.
41