Brother MFC-8460N User Manual page 128

Error Message Cause
The toner cartridge and drum unit
Toner Error
assembly is not installed properly.
The toner cartridge and drum unit
Toner Life
assembly is not installed properly,
End
or the toner cartridge is used up
and printing is not possible.
If the LCD shows Toner Low, you
Toner Low
can still print, however, the
machine is telling you that the toner
cartridge is near the end of its life
and the toner will soon run out.
More than one optional tray is
Too Many
installed.
Trays
The machine has a mechanical
Unable to
problem.
Init.
(Initialize)
Unable to
Print
The machine has a mechanical
Unable to
problem.
Scan
Document is too long for duplex
scanning.
Troubleshooting and routine maintenance
Action
Reinstall the toner cartridge.
Do one of the following:
Re-install the toner cartridge and drum unit
assembly.
Replace the toner cartridge with a new one.
(See Replacing the toner cartridge (TN-
3145/TN-3185) on page 131.)
Order a new toner cartridge now.
Maximum number of optional trays is one.
Remove additonal tray(s).
Turn off the machine's power switch and then on
again. If the error message continues leave the
machine for several minutes and then try to print,
copy or scan again. (The machine can be turned
off for up to 4 days without losing faxes stored in
the memory. See Checking if the machine has
faxes in its memory on page 120.)
Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes and then
try it again. (The machine can be turned off for
up to 4 days without losing faxes stored in the
memory. See Checking if the machine has faxes
in its memory on page 120.)
Press Stop/Exit. Use the suitable size of paper
for duplex scanning. See Scan on page 159.
119