Temporary Copy Settings; Copying Using Multiple Settings - Brother MFC-6800 Owner's Manual

Temporary Copy Settings

You can improve your
copies by using the Copy
keys: Enlarge/Reduce,
Contrast and Options.
These settings are
temporary, and the MFC
returns to its default settings 45 seconds after it finishes copying. If you want to
use these temporary settings again, place the next original in the ADF or on the
scanner glass before the 45 seconds expire.

Copying Using Multiple Settings

You can try different combinations of settings for the best results.
After you finish your settings using the
Enlarge/Reduce, Contrast and
Options keys, the LCD shows:
I
Press or if you want to select
additional settings.
—OR—
Press Copy if you are finished choosing settings.
To clear your settings and start over, press Clear Settings.
Note
The LCD shows copy settings status. You can set multiple settings.
Stack or
Sort
Copy Mode
(Type of Original)
Copy Contrast
Copy Ratio
or
Special Copy Option
M A K I N G C O P I E S
Copy Keys
No of Copies
11 - 3