Real Time Transmission - Brother MFC-6800 Owner's Manual

3
Press Fax Start. The MFC starts scanning the original and the LCD shows the
job number (#XX) of the fax and how much memory is available. Then the
machine starts dialing. For the next fax, you can repeat steps 1 through 4
immediately.
Your MFC normally operates in Dual Access mode.
Note
The number of pages you can scan into memory varies with the data they
contain.

Real Time Transmission

When you are sending a fax, the MFC will scan originals into memory before sending.
Then, as soon as the phone line is free, the MFC will start dialing and sending the fax.
If memory becomes full, the MFC will send the document in real time (even if
TIME TX
is set to
Sometimes you may want to send an important document immediately, without
waiting for memory transmission. You can set
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Press Menu/Set, 2, 2, 6.
3
To change the default setting, press
select ON (or OFF), and then press
Menu/Set.
Go to Step 5—OR—For the next fax transmission only, press
ONLY, and then press Menu/Set.
NEXT FAX
4
For the next fax only, press
Menu/Set.
6 - 5
S E T U P S E N D
OFF
).
or
to select
or
REAL TIME TX
to
ON (or OFF), and then press
REAL
ON
to .
to select
or