Changing Default Copy Settings - Brother MFC-6800 Owner's Manual

1
Press Options and
Set.
2
Press
or to select your type of paper, and then press Menu/Set.
3
Press Copy—OR—Press

Changing Default Copy Settings

Press Menu/Set, 3 to change default settings for Copy mode. These settings
will remain until you change them again by pressing Menu/Set. Adjust the
Contrast and Quality settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press or
to save your selection. Press Stop/Exit—OR—Press
setting you want to change.
Press Menu/Set, and 3.
1.COPY MODE
2.CONTRAST
3.PAPER TYPE
11 - 8
M A K I N G C O P I E S
to select OPT:PAPER
or
for additional settings.
or
to scroll through the options for each setting. Press Menu/Set
AUTO
TEXT
PHOTO
-
THIN
PLAIN
THICK
THICKER
TYPE, and then press Menu/
to select the next
+
is default