Printing Reports; Mfc Settings And Activity; Customizing The Transmission Verification Report - Brother MFC-6800 Owner's Manual

10

Printing Reports

10

MFC Settings and Activity

Two reports require initial setup in the Menu table: Transmission Verification
Report and Activity Report Interval. For initial setup:
Press Menu/Set, 2, 4, 1 .
—OR—
Press Menu/Set, 2, 4, 2.

Customizing the Transmission Verification Report

You can use the Transmission Report as proof that you sent a fax. This report
lists the job number, time and date of transmission and whether the transmission
was successful (OK). If you select
every fax you send.
When the feature is OFF, the report prints only if a transmission error
Note
prevented delivery (NG).
If you typically send multiple faxes to the same destinations, you may need
more than the job numbers to know which faxes you must send again. Selecting
OFF+IMAGE
you remember.
1
Press Menu/Set, 2, 4, 1.
2
Press to select OFF,
or
OFF+IMAGE,
and then press Menu/Set.
3
Press Stop/Exit.
10 - 1
P R I N T I N G R E P O R T S
ON
will print a portion of the fax's first page on the report to help
ON or ON+IMAGE,
or ON+IMAGE, the report will print for