Setting The Station Id - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0

Setting the Station ID

The Station ID is for identification purposes. Here you can store your name, fax
number, and telephone number. Your machine prints this information on the
electronic Cover Page and every fax page you send.
• The telephone number that you stored above is used only for the Call Back Message
and the Cover Page features.
• If you do not enter a fax number, no additional information can be entered.
• When you want to enter a space, use X (right arrow) . You can back up to type over
mistakes by using the Z (left arrow).
• If Station ID has been programmed, then after Step 5 the name will be displayed
with the prompt "1" to change "2" to exit. Press "1" to change information. Press "2"
to exit from the function.
KEYS TO PRESS
1 . Press Function.
(The MFC 4550 will skip to Step 4.)
2 . Wait for two seconds.
(Only for MFC 6550MC/7550MC)
3 . Press 1.
(Only for MFC 6550MC/7550MC)
4 . Press 7.
5 . Press 4.
You will be prompted to enter your fax
number.
6 . Enter your fax number (up to 20 digits).
Example: 4155554444.
7 . Press Set.
You will be prompted to enter your
telephone number.
TELEPHONE FUNCTION SETTINGS
THE DISPLAY WILL SHOW:
09/12/1996
O N L I N E
ENTER
(Only for MFC
1 . F A X
6550MC/
2 . P R I N T E R
7550MC)
(Only for MFC
1 . F A X
6550MC/
7550MC)
7.SETUP
4.STATION
F A X :
ENTER
F A X : 4 1 5 5 5 5 4 4 4 4 _
T E L :
ENTER
15:25
NO. & SET
SYSTEM
ID
& SET
& SET
3 - 3