Setting the Station ID
You should store your name or company name and fax number on
all fax pages that you send.
It is important that you enter the fax number in the internationally
standardised format, i.e. in accordance with the following strict
sequence:
■
The "+" (plus) character (by pressing
■
Your Country Code (e.g. "61" for Australia, "64" for New Zealand)
■
Your local area code minus any leading "0"
■
A space
■
Your number on the local exchange, using spaces to aid
readability as appropriate.
As an example, if the machine is installed in Australia and the same
line is to be used for both fax and voice calls, and your national
telephone number is 0161 444 5555, then you must set the fax and
telephone number parts of your station ID as: +61 161 444 5555.
1
Menu/Set
Press
2
Enter your fax number (up to 20
digits).
Menu/Set
Press
You cannot enter a hyphen.
3
Use the dial pad to enter your name
(up to 20 characters).
Menu/Set
Press
4
Stop/Exit
Press
The LCD will go back standby mode automatically.
If the Station ID has already been programmed, the LCD will ask
you to press
4 - 2 GETTING STARTED
0
3
,
,
.
.
.
.
1
to make a change or
key)
3.Station ID
Fax:
Name:
2
to exit without changing.