Changing Copy Quality; Changing Text Copy Resolution - Brother DCP-8060 User Manual

Chapter 5

Changing copy quality

You can select from a range of quality
settings. The default setting is Auto.
Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.
Text
Suitable for documents containing only
text.
Photo
Suitable for copying photographs.
To temporarily change the quality setting,
follow the instruction below:
a
Load your document.
b
Use the dial pad to enter the number of
copies (up to 99).
c
Press Quality.
d
Press d or c to choose Auto, Text or
Photo.
Press OK.
e
Press Start.
To change the default setting, follow the
instructions below:
a
Press Menu, 2, 1.
21.Quality
a Auto
Text
b
Photo
Select ab & OK
b
Press a or b to choose the copy
quality. Press OK.
c
Press Stop/Exit.
24
Changing text copy
5
resolution
You can change the text copy resolution to
1200x600dpi if you have selected Text
from the Quality options, and make a copy
with 100% ratio using the scanner glass. To
change the text copy resolution, follow the
instructions below:
a
Put your document on the scanner
glass.
b
Press Menu, 2, 2.
22.FB Txt Quality
a 1200x600dpi
b 600dpi
Select ab
c
Press a or b to choose the text copy
resolution. Press OK.
d
Press Stop/Exit.
& OK
5