2
Loading documents and paper
Loading documents
All scan and copy operations can be
performed from the ADF or the scanner
glass.
Using the ADF
You can use the ADF (automatic document
feeder) to scan or copy sheets of paper. The
ADF feeds each sheet one at a time.
When loading the ADF, make sure that
documents written with ink are completely
dry.
Documents must be from 148.0 to 215.9 mm
wide (5.8 to 8.5 inches) wide and from 148.0
to 355.6 mm (5.8 to 14 inches) long, and of a
standard weight (80 g/m
For information on the capacity of the ADF
see Specifications on page 77.
8
2
2
2
(20 lb)).
a
Unfold the ADF document output
support flap (1).
1
b
Fan the pages well.
c
Place your documents face up, top edge
first in the ADF until you feel them touch
the feed roller.
d
Adjust the paper guides to fit the width of
your documents.
CAUTION
To avoid damaging your machine while
using the ADF, do not pull on the document
while it is feeding.
To scan non-standard documents, see
Using the scanner glass on page 9.
2