Brother DCP-8060 User Manual page 53

Examples of poor print
quality
Curled or wave
B DEFGH
abc efghijk
A C D
b c d e
1 3 4
Wrinkles or creases
Envelope creases
ABCDEFGH
abcdefghijk
A B C D
a b c d e
0 1 2 3 4
Poor fixing
48
Recommendation
Check the paper type and quality. High temperatures and high humidity will
cause paper to curl.
If you do not use the machine often, the paper may have been in the paper
tray too long. Turn over the stack of paper in the paper tray. Also, fan the paper
stack and then rotate the paper 180° in the paper tray.
Make sure that paper is loaded properly.
Check the paper type and quality. (See Acceptable paper and other media on
page 9.)
Turn over the stack of paper in the tray or rotate the paper 180° in the input
tray.
a
Open the back cover.
b
Press against the "1" on the blue levers on either side of the machine as
shown below.
c
As the top of the lever rotates backward lift the bottom portion of the lever
from below until it stops.
d
Close the back cover and resend the print job.
Note
When you have finished printing,open the back cover and reset the two blue
levers back to their original position.
Open the back cover and make sure that the two blue levers on the left and
right hand sides are in the down position.