Other Sources Of Information - Brother DCP-750CW Network User's Manual

g
Follow the on-screen instruction, and then click OK.
Note
Contact your administrator if you are not sure about the location and name of the printer in the network.
h
Continue through the Wizard clicking Finish when complete.
Printer driver already installed
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
®
(For Windows 2000/XP/XP Professional x64 Edition users)
a
From the Printers and Faxes windows, select the printer driver you wish to configure.
b
Select File and then Properties.
c
Click the Ports tab and click Add Port.
d
Select the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the
New Port... button.
e
The Standard TCP/IP Port Wizard will start.
f
Close Add Port and Properties dialog box.
®
(For Windows 98/Me users)
a
From the Printers windows, select the printer driver you wish to configure.
b
Select File and then Properties.
c
Click the Details tab and click Add Port.
d
In the Add Port dialog, select Other and then Brother LPR Port.
e
Click OK and enter the port name.
Note
The default port name is BLP1. If you have already used this name, you will see an error message.
f
Port Properties dialog appears.
g
Enter the IP address of the machine that you wish to print to and click OK.

Other sources of information

See Configuring your machine for a network with an Ethernet cable connection on page 9 and Configuring
your machine for a wireless network on page 15 to learn how to configure the IP address of the printer.
Network printing from Windows
®
basic TCP/IP Peer-to-Peer printing
8
8
8
8
8
88