Other Sources Of Information - Brother NC-9100h Network User's Manual

If you have not created a spool directory for the Brother Print/Fax
server on your UNIX host computer, you will need to do so now (the
printer setup utilities in HP/UX, AIX, Solaris 2.xx, and other systems
will automatically create the spool directory). The lpd spool directory
is usually located in the /usr/spool directory (check with your
system manager to see if the location is different for your system). To
create a new spool directory, use the mkdir command. For
example, to create a spool directory for the queue laser1, you would
enter:
mkdir /usr/spool/lpd/laser1
On some systems it is also necessary to start the daemon. This is
done on Berkeley-compatible UNIX systems with the lpc start
command as shown in the following example:
lpc start laser1

Other Sources of Information

1
Visit http://solutions.brother.com/ for more information on
network printing.
2
Refer to chapter 11 of this user guide to learn how to configure
the IP address of the printer.
UNIX PRINTING 1 - 13