Brother DCP-750CW Network User's Manual page 104
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-750CW:
- User manual (113 pages) ,
- Quick setup manual (51 pages) ,
- Service manual (383 pages)
Table of Contents
Advertisement
5
(For Mac OS
Make the following selection.
6
Make sure that your print server appears. If it is visible, then the connection is good. Otherwise,
go to d.
d
Reset the print server back to the default factory settings and try from the initial setup again. For
information how to reset to the default factory settings, see Restoring the network settings to factory
default on page 81.
Error during printing
If you try to print while other users are printing large amounts of data (e.g. many pages or color pages with
high resolution), the printer is unable to accept your print job until the ongoing printing is finished. If the waiting
time of your print job exceeds a certain limit, a time out situation occurs, which causes the error message. In
such situations, execute the print job again after the other jobs are completed.
®
X 10.2.4 to 10.3)
Troubleshooting
10
10
97
Advertisement
Table of Contents
Troubleshooting
