Cleaning The Paper Pick-Up Roller; Cleaning The Print Head - Brother DCP-130C User Manual

Cleaning the Paper Pick-up
Roller
a
Pull the paper tray completely out of the
machine.
b
Unplug the machine from the AC power
outlet and remove the Jam Clear Cover.
c
Clean the Paper Pick-up Roller (1) with
isopropyl alcohol on a cotton swab.
1
d
Put the Jam Clear Cover back on.
Make sure the cover is set properly.
e
Re-connect the power cord.
f
Put the paper tray firmly back in the
machine.
B
1
Troubleshooting and Routine Maintenance

Cleaning the print head

To ensure good print quality, the machine will
regularly clean the print head. You can start
the cleaning process manually if needed.
Clean the print head and ink cartridges if you
get a horizontal line in the text or graphics on
your printed pages. You can clean Black only,
three colors at a time
(Cyan/Yellow/Magenta), or all four colors at
once.
Cleaning the print head consumes ink.
Cleaning too often uses ink unnecessarily.
CAUTION
DO NOT touch the print head. Touching the
print head may cause permanent damage
and may void the print head's warranty.
a
Press Ink.
b
Press a or b to choose Cleaning.
Press OK.
c
Press a or b to choose Black, Color
or All.
Press OK.
The machine cleans the print head.
When cleaning is finished, the machine
will go back to standby mode
automatically.
Note
If you clean the print head at least five
times and the print has not improved, call
Brother Customer Service (See Brother
numbers on page i).
B
63