Operation - RedMax BHT250PD60 Operator's Manual

4. Check that the cutter blade and blade guard (A) is
not damaged or distorted. Replace the cutter blade
and blade guard if it is damaged or bent.
Safety instructions for maintenance
WARNING: Read the warning instructions
that follow before you do maintenance on
the product.
To connect the battery charger
1. Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2. Put the plug in a grounded socket outlet. The LED
on the battery charger flashes green one time.
Note: The battery does not charge if the battery
temperature is more than 50 °C/122 °F. If the
temperature is more than 50 °C/122 °F, the battery
charger makes the battery become cool before the
battery charges.
To charge the battery
Note: Charge the battery if it is the first time that you
use it. A new battery is only 30% charged.
1. Make sure that the battery is dry.
2. Put the battery in the battery charger.
989 - 001 - 21.01.2019
•
•
•
A
•
•
•

Operation

3. Make sure that the green charging light on the
4. When all LEDs on the battery come on, the battery is
5. To disconnect the battery charger from the mains
6. Remove the battery from the battery charger.
Note: Refer to the battery and battery charger manuals
for more information.
Remove the battery before you do maintenance,
other checks or assemble the product.
The operator must only do the maintenance and
servicing shown in this operator's manual. Turn to
your servicing dealer for maintenance and servicing
of a larger extension.
Do not clean the battery or the battery charger with
water. Strong detergent can cause damage to the
plastic.
If you do not do maintenance, it decreases the life
cycle of the product and increases the risk of
accidents.
Special training is necessary for all servicing and
repair work, especially for the safety devices on the
product. If not all checks in this operator's manual
are approved after you have done maintenance, turn
to your servicing dealer. We guarantee that there are
professional repairs and servicing available for your
product.
Only use original spare parts.
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
fully charged.
socket, pull the plug. Do not pull the cable.
9