Remote Commands
96
Retrieve a fax
1 Memory Status List
2 Retrieve all faxes
3 Erase fax in the memory
97
Check the receiving status
1 DOCUMENT
2 VOICE
98
Change Answer Mode
1 MSG CTR
2 FAX/TEL
3 FAX
90
Exit
9 - 10
M E S S A G E C E N T E R ( F O R F A X - 3 3 5 M C O N L Y )
Operation Details
Enter the number of a remote fax machine to
receive a report or stored fax messages. (See
page 9-11.)
If you hear one long beep, you can erase the fax
message from the memory.
You can check whether your fax machine has
received any FAX or VOICE messages. If yes,
you will hear one long beep. If no, you will
hear three short beeps.
If you hear one long beep, you can change the
answer mode. If you hear three short beeps,
you cannot change it. (Example: There is no
MSG CTR OGM when you want to change to
MSG CTR mode.)
After a long beep, you can exit remote control.