Paper Capacity In Feeder (Available With Software Option); Connecting An External Telephone Answering Device (Tad); Sequence - Brother FAX 2750 Owner's Manual

F A X M A C H I N E S E T U P A N D C O N N E C T I O N S

Paper Capacity in Feeder (Available with Software Option)

Multi-purpose
Sheet Feeder:
Output Tray:
Basis Weight
Caliper
Moisture Content
Smoothness
Recommended paper types:
Cut sheet:
Label:
Transparency:
Connecting an External
Telephone Answering Device (TAD)

Sequence

You might choose to connect an additional answering system. When you have
an external TAD on the same telephone line as the fax machine, the TAD
answers all calls. The fax machine "listens" for fax calling (CNG) tones. If it
hears them, the fax machine takes over the call and receives the fax. If it
doesn't hear CNG tones, the fax machine lets the TAD continue playing your
outgoing message so your caller can leave you a voice message.
The TAD must answer within four rings. The fax machine cannot hear CNG
tones until the TAD has answered the call, and with four rings there are only
8–10 seconds of CNG tones left for the fax "handshake." Make sure you
carefully follow the instructions in this manual for recording your outgoing
message.
Do not connect a TAD elsewhere on the same phone line—your fax machine
and TAD will both try to control the line.
Up to 0.87 inch (22 mm) in height (up to the mark)
Approx. 200 sheets of 20 lb. (75 g/m
of 42 lb. (158 g/m 2 ) Letter/A4 paper, or 10 envelopes
Approx. 100 sheets of 20 lb. (75 g/m
paper
Cut Sheet
16 to 42 lb.
2
(60 to 158 g/m )
0.03 to 0.08 in.
(0.08 to 0.2 mm)
4% to 6% by weight
100 to 250 (Sheffield)
Xerox 4200
Avery laser label or equivalent
3M CG3300 for laser printers or equivalent
17
2
) or 50 sheets
2
) Letter/A4
Envelope
20 to 24 lb.
2
(75 to 90 g/m )
single thickness
0.0033 to 0.0058 in.
(0.084 to 0.14 mm)
single thickness
4% to 6% by weight
100 to 250 (Sheffield)