Manual Transmission; Automatic Transmission - Brother FAX 2750 Owner's Manual

48
C H A P T E R S I X
See
Resolution
p. 55
See
One-Touch
Dialing
p. 68
See
Speed Dialing
p. 68
Fan the paper, then stagger the pages in the document feeder as shown
below:
Stagger the pages
Resolution
Press (before you send the fax) to select the resolution for the
document you're sending.
DO NOT use curled, wrinkled, folded or ripped paper, or paper with
staples, paper clips, paste or tape attached. DO NOT use cardboard,
newspaper or fabric.
Make sure documents written in ink are completely dry.

Manual Transmission

Manual transmission lets you hear the dial tone, ringing and fax receiving
tones before sending the fax.
1
Insert the document face down in the feeder.
2
Pick up the handset and listen for a dial tone
—OR—press
Hook
3
Enter the fax number you want to call (you can enter the digits using the
dial pad, or you can enter a One Touch or Speed Dial number or you can
call from the Tel-index).
4
When you hear the fax tone, press
5
If you're using the handset, hang up.

Automatic Transmission

This is the easiest way to send a fax. IMPORTANT: Do not pick up the handset,
or press .
Hook
1
Insert the document face down in the feeder.
2
Enter the fax number using One Touch, Speed Dial, Tel-index or the dial pad.
3
Press Start .
and listen for a dial tone.
.
Start