Installing The Wall Storage & Charging Station - Bissell 2907F Manual

Installing the Wall Storage & Charging Station
Go to global.BISSELL.com for more tips and video instructions.
1.
Install your Wall Storage
& Charging Station at least
1.2 metres to allow the
machine to hang comfortably.
4.
Screw the wall mount into
a wall. Ensure the mount is
high enough up off the ground
for the vacuum to hang
comfortably. Screwing into
a wall stud will provide best
support.
7.
Secure the cable with the
charging cable clip.
4 global.BISSELL.com
>1.2m >1.2m
2.
Using a level, mark the screw
hole locations on the wall with
a pencil.
5.
To install the charging
cable, remove the power cable
clip from the Wall Storage &
Charging Station.
8.
Hang the vacuum on the
center storage piece and
insert tools on the tool holder
provided. Plug the power
adapter into the wall and place
the machine on the wall mount
for charging.
3.
Insert tool holder on the
side of the wall mount.
6.
Insert the charging cable.