Assembly; Installing The Wall Storage; Charging Station - Bissell ICONPET 3177 Series Manual

Assembly

Go to support.BISSELL.com for assembly videos.
1.
Connect the extension wand
to motorized floor cleaning
foot. The wand will "click" into
place.
Installing the Wall Storage & Charging Station
Go to support.BISSELL.com for more tips and video instructions on installing the Wall Storage
& Charging Station.
Install the Wall Storage & Charging Station near a wall outlet and at least 4 feet from the ground.
1.
Lift the cover of the mount
and position it using the
included bubble level.
4.
Pull the power cord clip
away from the mount.
2.
Connect the hand vacuum
to the extension wand. The
hand vac will "click" into place.
2.
Insert two screws to secure
to the wall.
5.
Insert the charging cord and
secure it with the clip.
3.
Charge your stick vacuum
before first use. Refer to page
6 for instructions.
3.
Insert the tool holders into
the side of the Wall Storage &

Charging Station.

6.
Plug the power adapter into
the wall. Place the machine on
the mount. Refer to page 6 for
charging instructions.
BISSELL.com 5