Assembly; Installing The Wall Storage; Charging Station - Bissell ICONpet EDGE CORDLESS VACUUM 2894 Series Quick Start Manual

Assembly

Go to support.BISSELL.com for assembly videos.
1.
Connect the Extension Wand
to Motorized Floor Cleaning
Foot. You'll hear a "click" when
they're connected.
Installing the Wall Storage & Charging Station
Go to support.BISSELL.com for more tips and video instructions.
1.
Install the Wall Mount &
Charging Station near a wall
outlet. Open the Wall Storage
& Charging Station, use the
bubble level to ensure it is level.
4.
Insert the charging cord.
2.
Connect the Hand Vacuum
Assembly to the Extension
Wand. You'll hear a "click"
when they're connected.
2.
Insert two screws to secure
to wall.
5.
Secure with the charging
cord clip.
3.
Make sure to charge your
stick vacuum before first use.
Refer to page 6, "Charging the
Battery" for instructions.
3.
Insert the tool holder into
the side of the Wall Storage &
Charging Station. Remove the
power cord clip.
6.
Plug the power adapter into
the wall and place the machine
on the station for charging.
Refer to page 6, "Charging the
Battery" for instructions.
BISSELL.com 5