Warranty; Assembly; Installing The Wall Mount & Tool Storage Station - Bissell CLEANVIEW 2831 Series Quick Start Manual

Warranty

2-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691
for complete warranty information.

Assembly

Go to support.BISSELL.com for assembly videos.
1.
Connect the extension wand
to motorized floor cleaning
foot. You'll hear a "click" when
they're connected.
Installing the Wall Mount & Tool Storage Station
Go to support.BISSELL.com for more tips and video instructions.
1.
Insert tool holder on the
side of the wall mount.
2.
Connect the hand vacuum
to the extension wand. You'll
hear a "click" when they're
connected.
2.
Screw the wall mount into
a wall. Ensure the mount is
high enough up off the ground
for the vacuum to hang
comfortably. Screwing into
a wall stud will provide best
support.
3.
Wrap cord on the side of
the product where the cord
clips are located.
3.
Hang the vacuum on the
center storage piece and
insert tools on the tool holder
provided.
BISSELL.com 3