Advanced Receiving Operations; Operation From An External Or Extension Telephone - Brother 515 Owner's Manual

40
C H A P T E R F I V E

Advanced Receiving Operations

See
"Setting the
F/T Ring
Time"
in this
chapter
See
"Outgoing
Message
(OGM) of
External
TAD"
chap. 2
In case Fax Detect does not work, because of a poor phone line
connection, just press Start or press the Activation Code
1
Press Menu, 2, 3.
2 Use Z or X to select ON, SEMI or OFF.
3
Press Set when the screen displays your selection.
4
Press Stop to exit.
If you've set the feature to ON, but your machine doesn't automatically
connect a fax call when you lift an external or extension phone handset,
5 1.
press
At the machine, lift the handset and press Start.
Operation from an External or Extension
Telephone
In order to activate the Remote Activation, you should first set Menu, 2,
4, REMOTE ACT to ON (see Changing Remote Codes) .
If you answer a fax call on an external or extension phone, you can make
your machine take over by using the Activation Code. When you press
the Activation Code
If the machine answers a voice call and F/T pseudo-ring for you to take
over, use the Deactivation Code # 5 1 to take the call at an extension
phone. The Deactivation Code is used only in F/T mode.
If you answer a call, and no one is on the line, assume you're receiving a
fax. At the machine phone, press Start, then hang up. At an extension
5 1, wait for fax receiving tones (chirps), then hang up.
phone, press
At an external phone, press
disconnected (the screen displays RECEIVE) before you hang up. (Your
caller will have to press Start to send the fax.)
If you accidentally pick up an extension phone when a fax message is
being received, you may disrupt the transmission or render some portions
unreadable.
Extension telephones are not pernitted in some countries, in such a case
the deactivation code will not work.
The Remote Activation Code also can be used by your callers. When you
are using an external TAD, your outgoing message (OGM) should end
with the statement "to send a fax, press
5 1, the machine starts to receive a fax.
5 1 and wait for the phone to be
5 1".
5 1.