Sequence Of External Tad Reception - Brother 515 Owner's Manual

3
End your message by giving your Remote Activation Code for
people sending manual faxes. For example:
"After the beep, leave a message or send a fax manually by pressing
51."
Please note that some faxes that are sent manually cannot be received
automatically because some fax machines do not send a fax tone in
manual mode. In these cases you must inform callers that they must enter
the remote activation code to send a fax.

Sequence of External TAD Reception

When you leave your machine set in TAD mode, all calls will be
answered by the externally connected telephone answering device, and
fax calls will be received automatically provided they come from a
machine which sends standard CalliNG tone (CNG).
Fax reception is
Auto dial
automatically
fax call
activated by
fax tone.
The fax message
is received on
paper.
I N S T A L L A T I O N
Incoming Call
The call is picked up
by the TAD.
(Recommended short
TAD ring delay such
as 1 or 2 rings.)
The external TAD
outgoing message
Manual
begins (recommended
fax call
length of 10 seconds
or less).
Voice call
The caller leaves a
voice message on the
The caller can also
external TAD.
send a fax message
after the voice message.
19
The caller must press
Start, or enter your
remote activation
code to activate the
machine and then
press Start.
The fax message is
received on paper.