Recording The Fax/Tel Outgoing Announcement (F/T Message) (Only For Fax-525Dt); Fax Detect - Brother 515 Owner's Manual

IMPORTANT! This machine does not re-generate ringing conditions to
any extension telephones. Any such extension telephones will only ring
during the period set on ring delay.
Recording the Fax/Tel Outgoing
Announcement (F/T MESSAGE)
(Only for FAX-525DT)
This is the announcement played by your machine (not an external TAD)
when someone calls and your machine is set to F/T mode. Although
callers hear your announcement, they cannot leave a message. To erase
the announcement, follow the directions in chapter 9, "Erasing the
Outgoing Message".
1
2
3
4
5
6
It is not necessary to have an outgoing message. The F/T mode will work
fine without one. It is only to help the caller understand the status of your
machine.
For example, you can leave a message that says:
"Hello, please wait, we are trying to connect you. If you wish to send a
fax, please wait until you hear a fax tone and press the Start key, or, press
51 (your three-digit remote activation code) and press the Start key."

Fax Detect

See
When you use this feature, you don't have to press Start when you
"Operation
answer a fax call and hear calling beeps. Just hold the handset and wait
from an
for several seconds. When you see RECEIVE on the fax screen or when
External or
you hear "chirps" through the handset of an extension phone connected
Extension
to another wall jack, just replace the handset, and your machine does the
Telephone"
rest. Selecting ON allows the machine to receive fax calls automatically,
and
even if you lift the handset of an extension phone or a phone or TAD
"For F/T
(Fax/Tel)
connected to the machine. Selecting SEMI lets the fax machine receive
Mode Only"
the call only if you've answered it at the machine. Selecting OFF means
in this
you'll have to activate the machine yourself, by pressing Start or by
chapter
pressing
Press Menu, 8, 3. The screen prompts you to choose F/T
MESSAGE, TAD MESSAGE or PAGING MSG.
Press Z or X to select F/T MESSAGE.
Press Set.
Press Record, then pick up the handset to record a message.
Replace the handset. Your announcement is played.
Press Stop to exit.
5 1 if you are not at your machine.
S E T U P R E C E I V E
39