TrekStor i.Beat joy 2.0 Quick Manual page 9

Mode: Playback settings
Switch to the "Play Setting" mode.
You can set the equalizer and various repeat functions in this mode.
Press the or button to select the desired setting, and confirm by pressing the
Briefly press the button to return to the main menu.
Note: These user instructions also apply to the "Recording Settings" and "Settings" modes.
Mode: Recording settings
Switch to the "Record Setting" mode.
In this mode, you can set the recording source, the source quality, and the recording sensitivity
(threshold of the recording).
Mode: Settings
Switch to the "Tools" mode.
In this mode, you can set the timer (sleep timer, eco mode), the length of illumination, the contrast,
and the language of the
memory, and format the
Note: Remember that when the
Note:
• This MP3 player is optimized for the provided earphones (32 Ohm impedance). Using other earphones with a lower impedance
can damage the MP3 player or earphone, especially MP3 players with 2 earphone jacks.
• Note: This device can produce high volumes. To prevent hearing loss, do not listen to high volumes for long periods. Do not use in
street traffic.
• Do not use USB cables longer than 3 meters.
The manufacturer retains the right to continuously improve the product. These changes may be made without being directly
described in these brief instructions. For this reason, the information provided in these brief instructions may not reflect the
current state of the art.
The manufacturer only guarantees suitability for the product"s intended purpose. In addition, the manufacturer is not
responsible for damages or loss of data and subsequent consequences.
Copyright © 2005 TrekStor GmbH & Co. KG. All rights retained. Other cited product or company names may be trademarks or
brand names of the respective owner.
QG_iBeat_joy20
i.Beat joy
. You can also display the entire memory and remaining
2.0
i.Beat joy
.
2.0
i.Beat joy
is formatted, it completely deletes all the data.
2.0
9
– 9 –
button.
18.10.2005, 15:56 Uhr
EN