Congratulations on your purchase of the TrekStor i.Beat joy 2.0 . We are sure you will enjoy countless hours of listening pleasure. The TrekStor i.Beat joy 2.0 is a high-quality MP3 player with numerous functions for enjoying music at home or on the go. Please read the instructions in this manual before using the player.
USB connector button button button / Recorder Volume Fast forward button button (Play/Pause/OK/On/Oﬀ) Note: The headphone jack also serves as a line-in jack for recording from external devices such as CD players, stereos, etc. (key lock) (menu) button (Right) Volume button Rewind button (Left)
The TrekStor i.Beat joy 2.0 has only a few buttons to make operation as easy as possible. There are more functions than buttons, however. How long you hold down a button determines which function you want to be carried out.
Press and release the buttons to adjust the volume gradually. Hold down the buttons to adjust the volume continuously. The TrekStor i.Beat joy 2.0 makes managing music ﬁles easy. You can store your data in diﬀerent folders. You can use the folder navigation function to select speciﬁc subdirectories and ﬁles.
ﬁle. Select to delete the ﬁle. Your TrekStor i.Beat joy 2.0 allows you to continuously repeat an excerpt of a track. To do so, while the track is playing, press to set the beginning of the segment you want to repeat point.
This mode is also referred to as M3U mode or Playlist mode since it uses Winamp playlists in M3U format. Create a Winamp playlist of MP3 ﬁles on your TrekStor i.Beat joy 2.0 to deﬁne the order in which tracks are a popular MP3 player that can be downloaded free of charge from...
Save the playlist directly to your TrekStor i.Beat joy 2.0 . The available playlists are then displayed in M3U mode. Select a playlist to play the tracks in the deﬁned order. Go to the main menu. Use the and press to conﬁrm your selection.
Connect an external source such as a CD player to the headphone jack. Press the button on your TrekStor i.Beat joy 2.0 as you start the external source. appears on the display. Recording begins, and the display indicates the length of the previous recording.
Select and press : Plays all tracks in order. : Repeats all tracks in the current folder. : Plays all tracks in random order. : Plays the ﬁrst 5 seconds of all titles in succession. Go to the main menu.
Go to the main menu. Use the and press to conﬁrm your selection. In the following submenu, you can adjust many of the TrekStor i.Beat joy 2.0 settings to your needs: and press to conﬁrm your selection. Press and press to conﬁrm your selection.
Restart your computer. A driver is not required to log your TrekStor i.Beat joy 2.0 onto Win- dows ME/2000/XP systems. However, you must install the current Ser- vice Pack version (currently SP4 for Windows 2000, and SP2 for Win- dows XP) to connect your TrekStor i.Beat joy 2.0 .
Once your TrekStor i.Beat joy 2.0 is connected to your computer, it runs like a normal hard disk. The device is automatically assigned its own drive letter. You can drag and drop to copy, move and delete any type of data on your device in Windows Explorer. Note: Your TrekStor i.Beat joy 2.0 only supports the FAT ﬁle system, not FAT32 or NTFS.
Once the MP3 ﬁles have been created, you can play the tracks on your computer (with Windows Media Player, for example). You can also copy the MP3 ﬁles right onto your TrekStor i.Beat joy 2.0 and play them from there.
Windows 98 users must use the to log oﬀ the Trek- Stor i.Beat joy 2.0 . In the , open left-click to select the TrekStor i.Beat joy 2.0 . Click . You can now disconnect your TrekStor i.Beat joy 2.0 from the USB connector.
TrekStor i.Beat joy 2.0. Download the ﬁrmware and save it to your PC. Unpack ALL ﬁles and copy them to the home directory of your TrekStor i.Beat joy 2.0 . Disconnect your TrekStor i.Beat joy 2.0 from your PC ( section 3.6). WITHOUT turning your TrekStor i.Beat joy 2.0 on, connect it to your computer and wait until the ﬁrmware update has ﬁnished.
The ﬁrmware has been damaged. To solve this problem, follow these steps: Remove the battery. Connect your TrekStor i.Beat joy 2.0 to your computer and hold down the Your TrekStor i.Beat joy 2.0 should appear in ’My Computer’ as a new drive. Update the ﬁrmware as described in sec- tion 4.1.
Indications in ’MB’ are always approximate since there is general confusion as to whether 1 MB = 1000 KB or 1 MB = 1024 KB (and whether 1 KB = 1000 bytes or 1 KB = 1024 bytes). Conse- quently, 128 MB can indicate a value between 128,000,000 bytes and 134,217,728 bytes.
The manufacturer only guarantees the suitability of the product for its intended use. TrekStor and its suppliers shall not be liable for loss of data that occurs during use or due to the use of the device or for consequences thereof. TrekStor shall under no circumstances be liable for direct, incidental...
Under no circumstances can claims that exceed the purchase price of the product be asserted. TrekStor reserves the right to continuously improve the product. All modiﬁcations may be made without describing them in this manual. The information contained in this manual must therefore not correspond to the current technical design.
Never place the device near other electrical devices or equipment such as televisions, radios and speakers since this could aﬀect the operation of the other devices. Never place the device near sources of magnetic interference such as computer monitors, televisions and speakers.
This product is subject to the legal warranty periods for manufacturing faults and defects. Warranty contents: 1. If a malfunction due to faulty manufacturing should occur, TrekStor will repair or replace the faulty product at its discretion. 2. The following repairs are not included in the warranty and must be undertaken at the user’s expense:...
To assert a claim on the warranty, contact your local shop where you purchased the device. You must present your sales slip. The retailer will then perform services justiﬁed by the warranty after consultation with the TrekStor service team. Do not send any products directly to TrekStor. Any such shipments will be processed.