Paper; Paper Specifications; Recommended Paper; Printing Range - Star Micronics SM-S230I Series Hardware Manual

4. Paper

4.1 Paper Specifications

Type:
Paper width:
Paper thickness: 58 to 75±5μm
Outer diameter:
Core shaft inner diameter: Ø12mm or more
Core shaft outer diameter: Ø18mm or more
Recording side:

4.2 Recommended Paper

Manufacturer
Mitsubishi Paper Mills Limited
Oji Paper Co., Ltd.
Appvion

4.3 Printing Range

57.5
4.75 mm
CAUTION
1) Do not use roll paper whose end is glued to its core, because the printer will be unable to
properly detect the end of the paper. Also, we recommend that you use roll paper that has a
roll end mark at its end.
2) Chemicals and oil may cause the roll paper to change color or cause the printed characters
to become lighter.
3) The roll paper starts changing color at approximately 70°C.
Please be aware that the roll paper can be affected by heat, humidity, and direct sunlight.
4) The roll paper may change color if you scratch it with your fingernail, a hard piece of metal,
etc.
Thermal Paper
57.5±0.5 mm
Ø40 mm or less
Outside of roll
Product Name
PD160R-63
Alpha 400-2.3
0.5 mm (Paper Width)
±
48 mm (Printing Area)
P220AG
PD450
PD160R
4.75 mm
- 32 -
Paper thickness
65μm
65μm
75μm
63μm
58μm