Related Manuals for Star Micronics SM-S200 Series
Summary of Contents for Star Micronics SM-S200 Series
- Page 1 Star Micronics Mobile Printers Software Manual - Star Mobile Logo Store Utility - Supported Models SM-S200 Series SM-S220 Series SM-S300 Series SM-S400 Series SM-T300 Series SM-T400 Series Rev. 2.2...
-
Page 2: Table Of Contents
• All efforts have been made to ensure the accuracy of the contents of this manual at the time of going to press. However, should any errors be detected, STAR would greatly appreciate being informed of them. • The above notwithstanding, STAR can assume no responsibility for any errors in this manual. Copyright © 2011 - 2013 Star Micronics Co., Ltd. -
Page 3: Introduction
Star Micronics Mobile Printers Logo Store Utility Introduction l This utility enables you to print logos on a receipt. This utility supports the following logo data formats. ∙ BMP (*Index color mode is not supported.) ∙ JPEG (supporting 24-bit color mode) ∙... -
Page 4: Getting Started
Star Micronics Mobile Printers Logo Store Utility Getting Started Before you can start using this logo store utility, you must prepare your printer. To prepare your printer, proceed as follows. 1. Perform a self-test, and check the memory switch settings. (For instructions on how to perform a self- test, see the hardware manual of your printer.) -
Page 5: Executing The Logo Store Utility
Star Micronics Mobile Printers Logo Store Utility 1. Executing the Logo Store Utility The executing steps vary according to the operating system. Therefore, refer to the section for the environment that you are using. 1.1 Windows XP To execute the logo store utility, proceed as follows. -
Page 6: Using The Utility
Star Micronics Mobile Printers Logo Store Utility 2. Using the Utility 2.1 Connecting to the Utility 1. After executing the logo store utility the port setting window appears. Select the port that the printer is connected to and the printer model, and click “OK”. -
Page 7: Storing Logos
Star Micronics Mobile Printers Logo Store Utility 2.2 Storing Logos 1. Click the [Image] icon to select the logo to be stored. * You can select the logos by selecting [File] – [Load file]. 2. Select the desired Image file and click “Open”. - Page 8 Star Micronics Mobile Printers Logo Store Utility 3. The selected logos are shown on the window. Click the icon in the red circle to store the logos. * You can store the logos by selecting [Transfer] – [Download ]. 4. When the download is executed, the following window appears.
- Page 9 Star Micronics Mobile Printers Logo Store Utility If the download is completed successfully, the following message will appear and the [LOGO TEST PRINT] icon will be available. - 7 -...
-
Page 10: Printing Logos
Star Micronics Mobile Printers Logo Store Utility 2.3 Printing Logos 1. Click the [LOGO TEST PRINT] icon. 2. Select the logo number of the logo data that you want to print. Click “OK” to print. - 8 -... -
Page 11: Menu Functions
Star Micronics Mobile Printers Logo Store Utility 2.4 Menu Functions 2.4.1 Disconnection of Port Click this icon to disconnect communication with the printer. 2.4.2 Connection of Port Click this icon to connect communication with the printer. - 9 -... - Page 12 Star Micronics Mobile Printers Logo Store Utility 2.4.3 Serial Port Settings Click this icon to Serial Port Settings with the printer. Select [Setup] – [Serial Port Setting] to change the serial port settings. < Other Portable Printer > < SM-S220 Series >...
-
Page 13: Revision History
Star Micronics Mobile Printers Logo Store Utility 3. Revision History Rev. No. Data of Revision Changes Rev. 1.0 Aug. 2011 First edition Rev. 2.0 Dec. 2012 Add support SM-S220 Rev. 2.2 Feb. 2013 Add support SM-T400 - 11 -... - Page 14 URL: http://www.star-m.jp/eng...